APG Ice Genie Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS:

• Only use Ice Genie™ Cube Maker as described in the manual
• Always store in a clean and dry place
• Ice Genie™ Cube Maker is top rack dishwasher safe

COMPONENTS

Inner Cylinder
USING THE ICE GENIE
Step 1
Step 1: Insert the Cylinder into the Chamber.
(Make sure the Cylinder reaches the bottom,
creating a seal between the Cylinder and Chamber)
Note: Feel around the base of the chamber to
see if the cylinder is properly seated.
INSTRUCTION MANUAL
For more tips and instructional videos, visit: www.IceGenieTips.com
• Keep away from extreme heat
• Ice Genie™ Cube Maker is NOT microwave safe
• Made with BPA free material
Outer Chamber
CUBE MAKER
™
Step 2
Step 2: Fill water into the channel at the
top of the Chamber. Fill until water
reaches just above the top row of cubes.
Note: Pour out any water that overflows
into the upper channel.
Step 3
Fill to
this point
Upper
Channel
Step 3: Snap the Lid onto the Ice
Genie™ Cube Maker. Place into
freezer until all the water is frozen.
(4-6 hours)
Tight Seal Lid