IMPORTANT SAFETY INSTRUCTIONS:
• Only use Ice Genie™ Ice Cube Maker as described in this manual
• Always store in a clean and dry place when not in use
• Ice Genie™ Ice Cube Maker is top rack dishwasher safe
COMPONENTS
Inner Chamber
USING THE ICE GENIE
Step 1
Step 1: Insert the Inner Chamber into the bottom of
the Outer Chamber, creating a seal. Feel around the
base of the Outer Chamber to see if the Inner
Chamber is properly seated.
Note: If base is not flat with bottom of Outer
Chamber, water will leak into the Inner Chamber.
Tip: Make sure it "pops" into place!
INSTRUCTION MANUAL
For more tips and instructional videos, visit: www.IceGenieTips.com
Outer Chamber
ICE CUBE MAKER
™
Step 2
Middle
Area
Step 2: Fill water into the channel at the top
of the Outer Chamber. Fill until water reaches
just above the top row of cubes.
*Be careful not to put water directly into the
Inner Chamber.
Note: Pour out any water that overflows into
the upper part of the channel.
• Keep away from extreme heat
• Ice Genie™ Ice Cube Maker is NOT microwave safe
Step 3
Fill to
this point
Channel
Step 3: Snap the Lid onto the Ice
Genie™ Ice Cube Maker.
Place into freezer upright until all
the water is frozen. (4-6 hours)
Lid
Need help?
Do you have a question about the Ice Genie and is the answer not in the manual?
Questions and answers