Advertisement
Move the Manual Canister
•
Remove both 1/4" x 1" hex bolts and hex nuts which fasten the manual canister to the SpeedTender.
•
Use the manual canister as guide and mark two points on the engine cover. Drill (2) 5/16" holes using the points as guides.
•
Mount the manual canister on the engine cover using the same (2) 1/4" x 1" hex bolts and nuts.
•
Tighten hardware.
1
2
Mount the Hydraulic Jack Control Valve
•
Attach the valve control using (2) 1/4" x 2-1/2" hex bolts and (2) 1/4" SF hex nuts.
•
Tighten hardware.
3
4
5
6
7
Set Up Instructions
Before
11
U-Bolts used
only on
A-Frame
8
9
10
After
9
Advertisement
