Advertisement
Table of Contents
How to set up the BraunAbility Remote app
1.
Download the BraunAbility Remote app from Google
Play or App Store.
2.
Activate Bluetooth on your smartphone.
3.
Run the Turny Low Vehicle to a position where the
Teach-in button (A) on the receiver is accessible.
4.
Press the teach-in button x3 and follow the setup wizard
in the app.
Illustrated: Turny Low Vehicle, swiveled out to the right.
Note! Turny Low Vehicle swiveled out to the left have
the Teach-in button located on the opposite side.
Before using this device, download and read the
user manual available at: www.braunability.eu
Teach-in button
BraunAbility Europe AB
Åkerivägen 7
443 61 Stenkullen
Sweden
Phone: +46 302 254 00
E-mail: info@braunability.eu
www.braunability.eu
BRAUNABILITY REMOTE
Quick guide for Turny Low Vehicle
Advertisement
Table of Contents
Related Manuals for BraunAbility REMOTE
Summary of Contents for BraunAbility REMOTE
- Page 1 How to set up the BraunAbility Remote app Download the BraunAbility Remote app from Google Play or App Store. Activate Bluetooth on your smartphone. Run the Turny Low Vehicle to a position where the Teach-in button (A) on the receiver is accessible.
- Page 2 How to install the BraunAbility remote receiver Swivel and extend the Turny Low Vehicle as far out as possible to access the location for the receiver (A). Use Control board box emergency mode if it does not reach far enough out, see the user manual.
Need help?
Do you have a question about the REMOTE and is the answer not in the manual?
Questions and answers