Display Control Menus; Remove Osd; Video Position Adj - Computer Dynamics VAMP-XGA3 User Manual

3.3 Display Control Menus

The PC Graphics Display Control menu appears when the
VAMP-XGA3 properly connected and powered up. The 'LEFT'
highlight the desired parameter and adjust the parameter value. The
used to move between the upper and lower row of icons on the display. The displayed bar graph
indicates the relative level for each parameter. To exit the Display Control menu, press the
FCTN
key.
Figure 3-2. PC Graphics Display Control Menu
Not making a selection or adjustment within sixty seconds of activating the Display
Control menu will result in the system exiting from the menu.
3.4.1
This menu selection allows the manual removal of the On Screen Display from the Panel.
Press the or
command.
3.4.2
This menu selection allows the adjustment of the picture on the Panel. Press the
or keys on the keypad to select the icon, then press
Xga3dusr.doc
R e m o v e
6 4 0 x 4 8 0

Remove OSD

keys on the keypad to select the icon, then press

Video Position Adj.

VAMP-XGA3 Manual Page 11
Copyright January 1999, Computer Dynamics, Inc.
FCTN
key is pressed with the
and 'RIGHT'
M E N U
O S D
FCTN
to begin this command.
keys
and keys are
FCTN
to begin this
2000-07-06