Sodex Sport S80104 User Manual

Sodex Sport S80104 User Manual

Rambler

Advertisement

Quick Links

DETAILS

SODEX INTERNATIONAL
18 rue de l'Avenir - Bât. 224
14650 CARPIQUET
Phone: + 33 (0) 2.31.53.78.70
Email: karine.chaigneau@sodexinternational.com
DESCRIPTION
Steel structure ф90
Plastified
CONFORM
European norm
NF EN 16630
The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired,
users should not be able to access to it until the repair is done. To ensure good use, routine visual ins-
pections are required, paying special attention to the following points: The cleanliness, ground clearance,
surface condition, visible foundations, sharp edges , missing parts, excessive wear of moving parts and
the structural integrity. Moreover, a more thourough functional check should be carried out every two
months on the following points:
- Check that all the screws are correctly tightened
- Remove all the non expected elements (ex: stickers, clothes, ropes,...)
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Check that all the instruction labels stuck on the modules are in condition and are readable. Replace
them if necessary.
- Check the stability of the modules. If one of them is sligthly unfixed from the foundation,
- Check that all the anchors are secure in the ground.
- Clean all dirty parts with soapy water.
Every year, it is recommended to check carefully the ground fixation. In order to do this, remove the dirt
covering the attachment plate, and inspect cautiously the wear of the fixations and of the concrete. Re-
place them if necessary. Check that the screws are firmly tightened.
Note : If the screws untighten too easily, do not hesitate to use Loctite !
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
-
all degradation during the transport.
-
all degradation due to use differing from which was intended.
-
all degradation due to poor maintenance.
-
any defect claimed after the end of the legal period.
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD EN-NF 16630
PRODUCT SHEET
PRODUCT REF

MAINTENANCE

WARRANTY

RAMBLER
S80104
:
UNIT
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S80104 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sodex Sport S80104

  • Page 1 PRODUCT SHEET RAMBLER UNIT S80104 PRODUCT REF DETAILS SODEX INTERNATIONAL 18 rue de l’Avenir - Bât. 224 14650 CARPIQUET Phone: + 33 (0) 2.31.53.78.70 Email: karine.chaigneau@sodexinternational.com DESCRIPTION Steel structure ф90 Plastified CONFORM European norm NF EN 16630 MAINTENANCE The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired, users should not be able to access to it until the repair is done.
  • Page 2 TECHNICAL DETAILS AND DRAWINGS Exercise space and evolution space Dimensions Height of free fall: 630 mm Evolution zone area: 17 m²...
  • Page 3 USER MANUAL Precautions: - Be careful during the access and egress to the module - Pratice it with a reasonnable rythm to avoid any injuries - Only one person at a time Muscular strengthening: This module is ideal to reinforce: - legs and arms muscles - stomach muscles - coordination...
  • Page 4 ASSEMBLY NECESSARY TOOLS (NOT INCLUDED) Special screwdriver INCLUDED ITEMS 1– ASSEMBLY OF THE FOOTS TO THE STRUCTURE - Connect the two parts with the grab bar by using the vandal-proof screws. INCLUDED ITEMS...
  • Page 5 FIXATION & SEALING NECESSARY TOOLS (NOT INCLUDED) Wrench 22 Shovel INCLUDED ITEMS NB: All the dimensions are in millimeter NB: Please pay a particular attention to the parallelism of the plates, because it has a direct impact on the parallelism of the foot supports.
  • Page 6 FIXATION & SEALING - Assemble the plate attachments as follow: - Pour concrete (EN 206-1), and stop when you are at 25cm of the surface. - Insert the attachments plates into the concrete, ensuring they are settled vertically. Let the concrete set during 3 or 4 days. NECESSARY ITEMS...
  • Page 7 FIXATION & SEALING Remove the nuts and the washers from the at- tachment plates. Mount the equipment onto the attachment plate and fix them together thanks to the fixing kit already used. Fill the gap with dirt, then cover. NECESSARY ITEMS...
  • Page 8 PACKING LIST FITNESS RAMBLER PRODUCT REF S80104 Index A UNIT NOMENCLATURE Package Weight Dim. Index Designation Description Quantity Packing Method N° (kg) (mm) Plastic Right main frame + 1850x1450x2 S80104-01 1 + 1 bubbles+cardb hands support oard 5 layers Plastic...

Table of Contents