Installation Instructions - modway EEI-2529 Leaflet

TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE
Different wall materials require unique wall fasteners.
The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct hardware for your wall type.
AA1 x 2
1
AA4

Installation Instructions :

1. Attach bracket (AA1) securely to the back top of the furniture using screw (AA4) provided. Allow 8 - 10 cm from each side.
wall plugs
2. Please make a hole for
plugs (AA2).
3. Locate the other bracket (AA1) on the wall over
line.
4. Lace the end of the restraints strap through the larger hole in each brackret. Ensure the restraints strap with grids surface facing the inner
loops. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is removed.
5. Make sure that the strap is securely laced & locked.
Customer Service 908-368-1025︱www.modway.com
AA2 x 4
AA1
2
position on the wall and minimum 15 mm below bracket secured to the back of unit attach the wall
wall plugs
AA3 x 4
AA2
4
(AA2). Place furniture into position so both brackets (AA1) are vertically in the
AA4 x 4
AA1
3 4
AA3
5
Grids Surface