Related Manuals for cctv camera pros ELT-L1350
Summary of Contents for cctv camera pros ELT-L1350
- Page 1 CCTV Elevator Camera with Wireless Video Transmission System Model: Model: ELT-L1350 Distributed by CCTV Camera Pros www.cctvcamerapros.com...
- Page 2 The package contains the main units and its components as specified below. When you purchase the package, please check to ensure the components specified below are included are included. Transmitter Receiver Brackets (used to raise receiver off floor) Camera Power Supply Cables...
- Page 3 ① POWER: 9V DC ② POWER: SWITCH ③ VIDEO: Indicates video signal when lasers are aligned. ④ POWER: Indicates power is connected ④ POWER: Indicates power is connected. ⑤ SIGNAL: Video Input/Out. ⑥ ALIGNMENT SCREW: To align the angle of the laser beam. ⑦...
- Page 4 Safety Precautions for Installation CAUTION Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous laser radiation exposure radiation exposure. EYE SAFETY Class 1M laser products, as defined in IEC/EN 60825-1:1994 and IEC/EN 60825-1/A2:2001. Although the NK -500 series meet ANSI and IEC standards for eye safety when not viewed with binoculars or other optical collecting devices at the telescope binoculars or other optical collecting devices at the telescope...
-
Page 5: Mounting Instructions
MOUNTING INSTRUCTIONS Due to the narrowness of the laser beam, alignment is critical and because of This the units must be attached to a rigid mounting surface. Install the receiver on proper place, using a metal mounting bracket that is provided in the package. There are several options to mount the system;...