Page 2
__________________________________________________________________________________ Mounting Instruction: Montageanleitung: Remove and disconnect the navigation system Bauen Sie die Navigationseinheit aus. Ziehen Sie die Anschlussstecker von der Navi Connect mutipin plug into navigation system according to picture below. In case the places are occupied, take the pins from one connector to the other. Stecken Sie die Adapterstecker (Interface) wie auf dem Bild dargestellt an die Navi.
Page 3
__________________________________________________________________________ Build in the navigation system and turn it on. Einbauen Sie die Navigation und Schalten ein. Make sure that your DVD-player works on PAL system. NTSC – this will cause the picture scrolling. Vergewissern Sie sich das Ihr Abspielgerät (DVD-Player) das Bild im PAL-Format wiedergibt ! NTSC Format wird nicht richtig wiedergegeben !!! Press “TV”...