Global 262077BL Assembly Instructions

Customer Service
1-800-645-2986
Perforated Metal Steel Bench With Back
Model No.262077BL/BK/GN/RD/GY
Model No.694557BL/BK/GN/RD/GY
Model No.695744BL/BK/GN/RD/GY
These assembly instructions and warnings should be retained by maintenance or safety
department for future reference. Routine maintenance and inspection of the equipment
should be performed every six months. Damaged and worn parts should be removed from
service until replaced or repaired to prevent safety hazards.
WARNING
• Assembly and installation of
equipment should be performed
by 2 people.
• Workers should use OSHA
approved safety and lifting
equipment.
WARNING
• This product contains chemicals
which are known by the state of
California to cause cancer, birth
defects or other reproductive harm.
Metal Mesh Bench with Back
Expanded Metal Steel Bench With Back
Expanded Metal Steel Bench With Back
Model No.277155BL/BK/GN/RD/GY
Model No. 277155 BL/BK/GN
Model No.277155 BL/BK/GN/RD/GY
Model No.277154BL/BK/GN/RD/GY
Model No.277154 BL/BK/GN/RD/GY
Model No.695743BL/BK/GN/RD/GY
WARNING
• Do not climb on, under or
through tables and benches.
• Two people required to move
tables and benches.
• Do not use if any parts of bench
or table are broken or damaged.
• Inspect and tighten hardware
every six months.
• Replace rusted hardware and
damaged components.
Assembly
Instructions