Page 1
LaMetric Time doesn't turn on Please make sure your device is connected to a power outlet via USB cable and power adapter. Please use only adapters with 5V output voltage and 2A current (We strongly recommend using only original power adapters and USB cables to power the device).
Page 2
There are several reasons that may cause this issue: 1. An error may occur also if Wi-Fi network on your smartphone is not the same as was chosen at the very beginning to connect LaMetric to. Tap Got It and connect your smartphone to the right one.
Page 4
2. If the problem arises because additional settings on your router are required, you will be headed to this screen. Your Wi-Fi network configuration prevents devices from communicating with LaMetric. In order to resolve this issue, you will need to disable AP (access point) isolation, AP isolation (also known as 'Client Isolation' or 'Guest Mode') on your router.
Page 6
3. If there was an incorrect time on your LaMetric, at first, you should try reconnecting it to your wi-fi. Make sure that: 1. You have correct time set on your mobile phone/tablet. 2. Your firewall doesn't block NTP server (*.pool.ntp.org) that LaMetric uses to update its time.
Page 8
4. If you see the following screen, you should check whether LaMetric mobile application is updated to the latest version.
Page 10
LaMetric lost Wi-Fi network or you moved it to other location When you see the screen with not available LaMetric, it means that device and smartphone cannot connect to each other. Tap on LaMetric to find out the reason of the problem.
Page 12
, it means LaMetric lost Wi-Fi, it may happen when the device was moved to another place. Tap on the same image on the screen, then click on Setup and begin the configuration process. supported by LaMetric. Please make sure your network is Now you can see the unique name of your LaMetric on the screen.
Page 13
Choose the network with the name which you see on LaMetric and come back to LaMetric Time application.
Page 14
For Android users, go to your phone Wi-Fi settings (tap Open Settings). Choose a network with the same name which you see on LaMetric in the Wi-Fi list and come back to LaMetricTime application.
Page 15
Connect LaMetric to home/office Wi-Fi network via LaMetric Time app. Select your home or office Wi-Fi network, which you usually use, to connect LaMetric to and enter the password. Tap Set up in the right corner on iPhone, or tap Next on Android smartphone...
Page 16
Android Wait a few seconds while LaMetric is connecting to Wi-Fi network.
Page 17
Android Wait until LaMetric is configuring. It is ready for use! LaMetric Time is ticking now. You just need to tap Go when the screen, that you see below, appears.