Page 2
Disclaimer The contents of this document are provided about RTX products. RTX makes no representations with respect to completeness or accuracy of the contents of this publication and reserves the right to make changes to product descriptions, usage, etc., at any time without notice. No license, whether express, implied, to any intellectual property...
Table of Contents High-End Headset Guide for RTX725x ..........................1 About This Document ..............................5 Audience ................................5 When Should I Read This Guide ........................5 What’s Inside This Guide ........................... 5 What’s Not in This guide ........................... 5 Abbreviations ..............................5 References/Related Documentation .........................
1 About This Document This document describes the configuration, management, operation and maintenance of the RTX725x headset series which are part of the range of the DECT system. For customer specific modes, please refer to specific customer agreements. 1.1 Audience This guide is intended for everyday users.
We always strive to produce the best and we also value your comments and suggestions about our documentation. If you have any comments about this guide, please enter them through the Feedback link on the RTX website. We will use your feedback to improve the documentation.
2 Package overview Prior to opening, examine the shipping package for evidence of physical damage. If there is proof of mishandling prior to opening, you must report it to the relevant support center of the regional representative or operator. 2.1 Content Make sure all relevant components are available in the package before proceeding to the next step.
3 System design The high-end headsets support the DECT and BT technology to establish connection with other devices. They are used with the RTX7451 DECT base and Desk Phone / PC / Laptop/ mobile phones. The selected microphone is balanced together with the headset filters to reduce the background noise to provide an ultimate understandable and clear speech.
Handover to VoIP multicell systems The RTX725x headset and RTX7451 base together can integrate into VoIP multicell and dual cell systems. The headset base will register on behalf of itself and the headset. The two registrations are independent but will be linked logically as one unit on the VoIP system.
4 About the device The RTX725x series are wireless DECT+BT headsets. As mentioned before, the headset connects to the DECT base, which acts as a charger for the headset, via the DECT wireless technology. It can also connect via Bluetooth to supported devices such as mobile phones and Bluetooth compatible desk phones.
Page 11
Ear cup movement 2-axis Flexible boom Bendable Boom movement 270° rotation Headband material Plastic and silicone Headband rachet 30mm±2mm Ratchet marking indication (on head side) Busy light Integrated on boom arm multi-color LED Proximity sensor (Auto Hook off) Noise cancellation Yes –...
4.3 Headsets overview The following section aims to give an overview of the headsets and the available buttons. The following drawings illustrate the dimensions of the RTX725x series headsets. Fig.5: Dimensions of RTX7251 Fig.6: Dimensions of RTX7252 Fig.7: Dimensions of RTX7254 RTX725x GUIDE 1.0 12 | P a g e...
The images below represent the styling of all 3 headsets from the RTX725x series. By default, the color is grey, and the devices have removable ear cushions. Fig.8: Styling of RTX7252 and RTX7254 Fig.9: Styling of RTX7251 Ear cushions The cushions of the headsets are removable and replaceable. There are two types of ear cushions – on-ear and over- the-ear (Fig.7 Ear cushions).
Physical buttons The headset is operated using the buttons on the earcup with boom arm. The ANC button is located on the opposite earcup as ANC is not available for Mono headsets. Fig.11: Double Bottom view Fig.12: One-sided view Fig.13: Back side view RTX725x GUIDE 1.0 14 | P a g e...
The following table represents the functions of the buttons seen on the figures above Input Functions Power slider Power the headset on and off Scroll wheel with an Increase volume integrated key Decrease volume Play/Pause music Skip to next track Multi-Function Button Answer call End call...
Registration, In progress Blue, red Alternating Registration, Success Green Blink 3 times DECT registration Registration, Failed Blink 3 times No battery Cyan Blink Fully charged Green Battery status Charging Green Breathing Breathing Busy mode Busy enabled or call active 4.5 Battery The headsets use 600mAH Li-polymer battery, which is easily replaceable after removing the battery lid, as illustrated on the image below.
5 Features overview This section aims to introduce you to the available features of the headset series RTX725x. Some of the features will be briefly described through the sections below, whereas the main highlights will be presented via a table with function descriptions.
5.5 Summary The table below presents a summary of the features available in the headsets. Input Functions DECT frequency bands: 1880 – 1895 MHz (Taiwan) 1880 – 1900 MHz (EMEA) 1910 – 1920 MHz (Brazil & Uruguay) 1910 – 1930 MHz (LATAM, Argentina, Chile) 1920 –...
Page 19
Range (max) 200m outdoor Security Class C Standard DECT interface Handover to VoIP multicell systems Software Update Downloadable Air-interface Bluetooth No. of pairings BT Version 4.2 Classic Frequency 2401 MHz – 2480 MHz Sensitivity Better than -92 dBm @ DH1, measured at antenna Output power Class 2, 2,5mW (4dBm)
6 Regulatory compliances 6.1 Safety & Type approvals The regulatory compliance and measurements reports required are: Approval Standard GENERAL SAFETY Safety CB IEC62368, EN62368, IEC60950, EN60950 Including the country deviation to US/CA, AU/NZ and EU Safety UL62368, and NRTL for US and CA Safety CB Scheme Certificate FCC Part 15B...
WEEE Per Directive 2012/19/EU on Waste Electrical and Electronic Equipment (RTX will add waste bin information on product labels). Packaging: EU Directive 97/129/EC establishing the identification system for packaging materials pursuant to European Parliament and Council Directive 94/62/EC on packaging and packaging waste RTX725x GUIDE 1.0...
APPENDIX 7 DECT cradle registration The following steps serve as a guideline for the process of registering the RTX725x headsets to the RTX745x base. Registration mode is enabled by inserting the headset into the base cradle. The headset can be registered as both primary and secondary.
Page 23
8 Declaration of compliance 8.1 FCC warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 24
Cet appareil est compatible avec la licence de l’Innovation, la Science et le développement conomique du Canada à l’exemption des normes RSS. Le fonctionnement est sujet aux deux (2) conditions suivantes : (1) Cet appareil peut ne pas causer de l’interférence, et (2) Cet appareil doit accepter l’interférence, incluant de l’interférence qui peut causer un mauvais fonctionnement de cet appareil.
Need help?
Do you have a question about the RTX725 Series and is the answer not in the manual?
Questions and answers