AgfaPhoto Optima 8328m User Manual page 14

AgfaPhoto OPTIMA 8328m
Setting the Date & Time
1
Turn the power on, and set the
camera to the Setup Menu
( page 18).
2
Select [
Press
[Date & Time] then press
or the SET button to launch
the submenu.
3
Set date and time.
Press
to move the cursor between settings.
T i p s
T i p s
Holding down
For date stamp setting (
4
Apply the setting.
After adjusting the settings, press the SET or the MENU button to apply
the setting.
C a u t i o n
C a u t i o n
If the batteries are removed for longer than 48 hours, the Date & Time will need
to be re-set.
Date & Time].
or to select
or to change the value of the cursor located. Press
or changes the values continuously.
page 38).
9
or