Advertisement
through the control circuit into built-in accumulator under the
sunlight. On condition that has not sunlight, you may charge
the built-in accumulator through your original power supply.
Ⅳ. Using Method
1.
Pull the protective film of cell board apart and wipe it
clean, place charger suffering the direct radiation under
the sunlight with red light working. In order to fully
make use of solar energy, it is best to be vertical with the
light, generally shine above 12 hours under the abundant
sunlight, built-in accumulator can be fully charged.
2.
When no sunlight for a long time, you can make use of
configured AC to DC charger to charge the built-in
accumulator, charging method is connect configured AC
to DC charger to DC input interface through connecting
line, directly charge the charger, when charging, the blue
indicating light will brighten, when the blue indicating
light on the charger extinguishes, indicate built-in
accumulator has been fully charged.
3.
When connector USB plugs in appropriate specification
Advertisement
