Table of Contents
Advertisement
charged quickly.
(8) Refer to specification before use. Improper operation
can lead to the damage of built-in accumulator and
electrical appliance components or the attenuation of
cell capacity.
Ⅶ.Troubleshooting
1.
When directly charge, indicating light LED has the red
scintillation for reason of a low voltage inside the
accumulator, so when charge, first charge the built-in
accumulator. The solution is that charge
telephone through built-in accumulator, according to
using method（2*）.
2.
When built-in accumulator charges mobile telephone,
"power cabin" has a slight sound, which is normal.
3.
When built-in accumulator charges mobile telephone, red
and green indicating light LED
charging will be finished which is normal.
4.
If the switch is set at CH end, indicating light LED is not
bright,
which
indicates
flashes, indicating
the
voltage
mobile
in
built-in
Advertisement
Table of Contents
