Cleaning; Specifications; Troubleshooting - Panasonic EH-HV10 Operating Instructions Manual

Cleaning

Clean the straightener or Cap (H) after they have cooled and
with the plug removed from the power outlet.
• Do not touch the body until it has cooled down.
• To clean the straightener or Cap (H), use a cloth that has
been soaked in soap and water and well wrung out.
• Do not use alcohol, thinner, benzine or remover.
Doing so may crack or discolor the surface of the
straightener.

Troubleshooting

Problem
During use, the unit gives off a burning
smell.
The Iron Plate does not get hot.
The main body is partially deformed.
If problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic
for repair.

Specifications

Model No.: EH-HV10
Power source
Power consumption
Iron temperature
This product is intended for household use only.
Possible cause
Dust etc. are adhered to the Iron Plate.
The cord is disconnected.
100 - 240 V 50 - 60 Hz
22 W
Approx. 210 ˚C
Action
Clean the Iron Plate to
remove any adherents.
Stop using immediately.
13