R
· Never allow children (or adults) to ride on or swing from garment rack
· Keep casters free of thread, lint, hair and other debris. Be sure casters turn easily and roll freely
at all times. If a caster does not roll properly, remove the garment rack from service immediately.
· Periodically check all nuts and bolts to ensure they are tight.
!
· Weight limit 175 lbs. — Do not overload!
· Be sure all loads are evenly balanced at all times. Overloading or unbalanced loads may cause
tipping, resulting in serious injury.
· Always proceed slowly and use extra caution when turning corners.
@
SALES
RBWIRE.COM
STEP
Install casters to upright legs by inserting caster
stems into bottom of legs. Insert bolts through side
with flush bolt holes, and secure with nuts on the side
with dimpled bolt holes.
STEP
Place crossbar (with warning label side facing up) onto
the side of the wheelbase with nuts. Align the three
vertical holes and secure with partial-thread bolts and
nuts, with nuts on underside. Then secure horizontal holes
with four partial-thread bolts. Nuts should be on the same
side as crossbar. Repeat for other side.
(800) 634-0555
ASSEMBLY INSTRUCTIONS
MODEL 715/721 and 722/725
Portable Garment Racks
TOOLS REQUIRED:
(2) 7/16 wrenches or sockets
2 person assembly suggested
1
2
715, 721 HARDWARE INCLUDED
x28 Nuts
x4 Full-thread bolts
RBWIRE.COM
(Not to scale)
x24 Partial-thread bolts