Setting The Dpof - AgfaPhoto DC-1033m User Manual

AgfaPhoto DC-1033m

Setting the DPOF

The Digital Print Order Format (DPOF) setting allows you to select images on the
memory card for printing and specify the number of print copies in advance using the
camera. This is extremely convenient for sending the images to a photo developing
service or for printing on a direct print function compatible printer.
1
Turn the power on, and set
the camera to the PLAYBACK
mode (
2
Open the menu.
Press the MENU button,
then use the four-way
control to select DPOF
( ) and press the SET
button.
s
3
Press
To set the DPOF setting for all images, select [All] in this step.
To reset all DPOF settings to initial default, select [Reset] in this step.
4
Press
5
Set the number of copies.
Press
The number of copies can be set from 0 to 30.
To cancel this image DPOF setting, set the number of copies to 0.
6
Print the date stamp out.
Press SCN button to set the date stamp of current image. Press SCN button
again to turn off date stamp.
Repeat step 4~6 to other images for printing.
7
After you finished all image settings, press the SET or MENU button to
apply it.
page 13).
or to select [Single], then press the SET button.
or to select the image you want to print out.
or to specify the number of copies.
51