Noble House Home Furnishings Extention Table Assembly Instructions Manual page 13

Step 3
Place the Left Armrest/Leg (D) as pictured above and affix to Backrest (A)
and Seat(B) using Hardware(F, G) with Allen Key(H) as shown in Picture 4
and Picture 5.
LOOSELY TIGHTEN.
Step 4
Stand CHAIR rightside up.
Check stability and then tighten the bolts.
Note: DO NOT fully tighten a BOLT in one go and then move on to the
next. Rather, In a sequential manner, gradually tighten each Bolt until
all bolts are evenly secured. This methodology will ensure maximum
evenness once all Bolts are fully tightened.
Step 5
Put the Seat Cushion(E) on the Seat.
Your Chair is ready for use.
Page 4 OF 5