Samsung SWA-9100S User Manual page 4

01 CHECKING THE
COMPONENTS
Wireless Receiver Module / Surround Speaker X 2 / Speaker
Cable X 2 / Power Cord
NOTES
• For more information about the power supply and power
consumption, refer to the label attached to the product.
(Label: Rear of the Main Unit)
• Design and specifications are subject to change without prior
notice.
02 CONNECTING THE
SWA-9100S TO A
SOUNDBAR
1. Connect the Wireless Receiver Module to
2 Surround Speakers
Use the speaker cables to connect the two surround sound
speakers to the Wireless Receiver Module.
• When connecting the speaker cable, connect the core wire to
the speaker.
SURROUND-RIGHT
• The speaker cables are colour coded.
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
SURROUND-LEFT
ID SET
L
SURROUND-LEFT
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
• When connecting the speaker cables to the Wireless Receiver
Module, follow these steps:
1. Insert the grey plug into the grey jack on the Wireless
Receiver.
2. Insert the blue plug into the blue jack on the Wireless
Receiver.
English - 4
SURROUND-RIGHT
SURROUND-RIGHT
R
SURROUND-RIGHT
POWER
• When connecting the speaker cables to the surround speakers,
follow these steps:
1. Match the speaker cable connected to the grey jack to the
speaker with the grey label.
2. Match the speaker cable connected to the blue jack to the
speaker with the blue label.
3. Insert the red and black coloured ends of each speaker cable
into the red and black jacks of the appropriate speaker.
• The labels are on the backs of the speakers.
2. Check the standby status after plugging into
an electrical outlet
Plug the Wireless Receiver Module power cord into an electrical
outlet and into the Wireless Receiver Module to turn on the
Wireless Receiver Module. The LINK LED indicator (blue LED) on
the Wireless Receiver Module blinks. If the LED does not blink,
refer to step 6.
L R
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3 SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
ID SET
POWER
POWER
POWER
POWER
3. Turn off the Soundbar
Turn off the Soundbar using the Soundbar's remote control or by
pressing the (Power) button on the main Soundbar unit.
• The image of the Soundbar may differ from your Soundbar,
depending on the model.
STANDBY
STANDBY
LINK
LINK
STANDBY
STANDBY
LINK
LINK
Blue blinking
BYE
4.
Pre
• T
f
• A
t
• T
d
5.