Advertisement
INSTALLATION INSTRUCTIONS AND HOLE-CUTTING TEMPLATE
USE
Our bathroom
unit uses the infrared heating lamps as a source of heat.
SATIN heat-fan-light
It also combines the functions of exhaust and light.
1. Heat
'HEAT' button On/Off
This model is supplied with two groups of infrared heat lamps. You can switch them on
in banks of two for an optimal heating effect. Each individual infrared lamp has been
sprayed with 4ºC cold water to ensure that there are no flaws in the construction.
Note: Do not touch the infrared lamps with any part of your body when in use.
2. Exhaust
'FAN' button On/Off
This unit can exhaust odours and steam in a quick and efficient way by turning on the
"FAN" button.
3. Lighting
'Light' button On/Off
Note: Do not switch on/off frequently when in use. Turn the power off if not in use over a
long period.
MAINTENANCE
1. Clean
1. Shut off the power before cleaning.
2. Wipe lamps and fascia with care using a soft cloth soaked with a neutral detergent.
Note: Ensure the lamps are cool to touch before handling.
2. Lamp Replacement
1. Check and tighten lamps regularly.
2. Shut off power before replacement.
3. Use 10W max. LED downlight ø80mm x 40mm for lighting.
4. Use E27 275W infrared lamps for heating.
Note: It may affect operation (even cause danger) if lamps other than the designated
ones are used.
WARRANTY - 5 YEARS / INFRARED LAMP - 2 YEARS
The main unit and fan motor is warranted against factory fault for a period of 5 years and
the oiriginal supplied MANROSE infrared lamps for a period of 2 years. Labour costs are
not covered. Please keep and bring the original invoice to your place of purchase for
warranty services.
This warranty does not cover damage or loss caused by:
1.
LED lamp or failure of LED lamp.
2.
Any consequential losses arising from incorrect installation or operation or
maintenance of this product.
3.
Any consequential losses arising from incorrect wiring of this product.
4.
Any consequential losses arising from repairing of any part of this product by
unauthorised persons.
Read and save these instructions!
MAIN TECHNICAL PARAMETERS
Model Numbers
Rated Voltage
Rated Frequency
Rated Power
LIST OF ACCESSORIES
Operation Unit
Infrared Lamp (E27)
LED Lamp
Installation Instruction & Hole-cutting Template
3.0 metres Flexible Ducting
Grille
Duct Clip
Switch
Fill out the following details and file with the purchase invoice for warranty service.
MANROSE SATIN
MODEL NO. FAN6882/FAN6883
Purchased from:
Date of purchase:
Note: Instructions and specifications are subject to change without notice.
Please take this card as hole cutting template 320mm x 320mm
FAN6882/FAN6883
220-240V AC
50Hz
1080W-1180W
1 piece
4 pieces
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
Advertisement
