Download Print this page

Kohler Memoirs K-1418-G Installation & Dimensions page 2

6' bubblemassage bath

Advertisement

1-1/2"
Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Blower:
240 V, 15 A, 50/60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Drop-in
Drain location:
Center
Basin area, bottom:
48" x 27" (1219 mm x 686 mm)
Basin area, top:
60" x 30" (1524 mm x 762 mm)
Weight:
150 lbs (68 kg)
Minimum floor load:
54 lbs/ft² (263.7 kg/m²)
Water depth:
16" (406 mm)
Water capacity:
94 gal (355.8 L)
Cutout:
Drop-in, 70-1/2" x 40-1/2" (1791 mm x
1029 mm)
Electrical component
Blower: 240 V, 5 A, 50/60 Hz
rating:
Blower speed:
Variable
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2019 04:34 - US/CA
6' BubbleMassage Bath
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
connected to the blower. Follow the blower
relocation instructions exactly. Provide access
for servicing the blower.
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
Memoirs
K-1418-G

Advertisement

loading