Related Manuals for Jefferson JEFHOSRLH15-1/2
Summary of Contents for Jefferson JEFHOSRLH15-1/2
- Page 1 Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 User Manual v1.1 www.jeffersontools.com...
-
Page 3: Table Of Contents
The information in this document is to the best of our knowledge true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond their control, Jefferson Tools® disclaim any liability for loss or damage suffered from the use of this data or suggestions. Furthermore, no liability is accepted if use of any product in accordance with this data or suggestions infringes any patent. -
Page 4: Introduction
Ensure that this equipment is well maintained and kept in good clean condition. Check equipment regularly for • damage. Any damage should be repaired by an authorised Jefferson Repair Centre. Use only Jefferson recommended • parts when repairing the equipment. Unauthorised parts and servicing may be dangerous and will invalidate the warranty. -
Page 5: Assembly / Mounting The Reel
Internal maintenance, which will require the opening of the casing, must only be undertaken by an authorised Jefferson Repair Centre. Warning: exposure of skin directly to pressurized air, or fluid could result in severe bodily injury. Do not direct air from the air hose at yourself or others. - Page 6 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 3. Assembly / Mounting The Reel (continued...) Mounting the Reel The reel base is supplied with four 12.7mm (1/2’’) drilled mounting holes for mounting on a suitable flat surface.
-
Page 7: Operation
Note: The final spring adjustment is accomplished by adding or removing wraps of hose around the drum. Warning: If the rewind spring fails for any reason contact your nearest Jefferson Dealer to organise replacement / repair of the spring canister. - Page 8 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 6. Parts List and Parts Diagram...
- Page 9 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 Quantity Description Quantity Description Bolt Support bracket arm Support bracket Washer Assembly hub bearing Bolt Drum for spring Spring Bolt Axle Roller Drum Drum Axle for roller Assembly hub bearing...
-
Page 10: Limited Warranty Statement
Jefferson shall, upon suitable notification, correct any defects, by repair or replacement, of any parts or components of this product that are determined by Jefferson to be faulty or defective. This warranty is void if the equipment has been subjected to improper installation, storage, alteration, abnormal operations, improper care, unauthorised service or repair. - Page 11 (normally within 7 working days). Note: If the repair quotation is not accepted Jefferson Professional Tools & Equipment will invoice 1 hour labour time at £30 per hour plus return carriage costs (plus VAT). In cases where no fault can be found with the equipment, or, if incorrect operation of the equipment is identified as the cause of the problem, a minimum of 1 hour labour at £30 per hour plus carriage costs will be required before the equipment will be...
-
Page 12: Ec Declaration Of Conformity
Technical file holder's address as shown below Name and address of manufacturer or authorised representative: Jefferson Tools, Herons Way, Chester Business Park, Chester, United Kingdom, CH4 9QR Telephone: +44 (0)1244 646 048 Fax: +44 (0)1244 241 191 Email: enquiries@jeffersontools.com www.jeffersontools.com... - Page 13 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 Notes:...
- Page 14 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2 Notes:...
- Page 15 USER MANUAL 15M - 1/2" Industrial Auto Retracting Air Hose Reel JEFHOSRLH15-1/2...
- Page 16 Jefferson Tools, Herons Way, Chester Business Park, Chester, United Kingdom, CH4 9QR Tel. +44 (0)1244 646 048 Email: sales@jeffersontools.com www.jeffersontools.com...
Need help?
Do you have a question about the JEFHOSRLH15-1/2 and is the answer not in the manual?
Questions and answers