Advertisement
Quick Links
Advertisement
Related Manuals for CamFive FM Series
Summary of Contents for CamFive FM Series
- Page 1 Quick Start Guide “FM series” Fiber Laser Marking Machine...
- Page 2 FM30/fm50 Quick Start Guide Fiber Laser Marking Machine Preface First of all, thanks for choosing and buying our CAMFive Fiber series laser marking machine. Your trust is the bi- ggest support for us. In the following, the general ins- truction and basic application of the fiber laser marking machine will be introduced to you in several aspects.
- Page 3 FM30/fm50 Quick Start Guide As the input/output terminals, laser Optical fiber laser marking machine power supply, sound and light belongs to the fourth-class laser power supply, and control power products, therefore, please wear supply, etc. may be charged, you protective glasses while using it. must be careful while in use to The technical workers without trai- avoid electrical shock.
- Page 4 6) The top cover plate must be covered when in use in case the laser deviating and causing damage to people. 7) When the voltage is unstable, it is prohibited to start up the CAMFive Laser Machine FM30/FM50. Otherwise, a voltage stabilizer must be used.
- Page 5 FM30/fm50 Quick Start Guide Content Chapter One: Brief Introduction Summary Main Specifications Chapter Two: Working principle and structure Marking Principle Structure Description Fiber Laser Control Section Back Panel of the Control system Other Parts of the Marking Machine Chapter Three: Installation Requirements & Operating Instructions Equipment Installation Requirements Operation Process Instructions 3.2.1...
- Page 6 FM30/fm50 Quick Start Guide Chapter One: Brief Introduction 1.1 Summary Optical fiber laser marking machine is a kind of professional laser marking equipment, which integrated light, machine, electricity, independent research and development, and production. The key components are imported. Our machine is with the advantage of novel style, unique structure, convenient operation, high-frequency modulation, high marking speed and precision, and stable performance.
- Page 7 FM30/fm50 Quick Start Guide 1.2 Main Specifications Laser wavelength: 1064nm Laser power: 30W / 50W Modulation frequency: 20KHz-80KHz Scanning speed: ≤2000 to 7000mm/s Repeatability precision: 0.001mm Engraving range:100mmX100mm (optional 300x300mm) Marking depth: 0.01- 0.2 mm (Depending on the material) Marking line width: 0.01-0.2 mm (Depending on the material) Power supply: AC220V ±10%, 60 Hz, ≤0.8KW Safety: overcurrent protection, over-temperature protection, over-voltage protection Continuous Working hours: >23 Hours...
- Page 8 FM30/fm50 Quick Start Guide Chapter Two: Working principle and structure 2.1 Marking Principle * The laser light energy evaporates the material in the surface and shows lower material; * The laser light energy causes the surface chemical to change physically and "engrave"...
- Page 9 FM30/fm50 Quick Start Guide...
- Page 10 FM30/fm50 Quick Start Guide 2.3 Fiber Laser ：...
- Page 11 FM30/fm50 Quick Start Guide...
- Page 12 FM30/fm50 Quick Start Guide 2.5 Back Panel of the Control system...
- Page 13 FM30/fm50 Quick Start Guide 2.6 Other Parts of the Marking Machine Rotary-80 (optional) Foot Switch Len of 100 Structure Diagram of the Laser (Scan filed 100*100mm)
- Page 14 FM30/fm50 Quick Start Guide Chapter Three: Installation Requirements & Operating Instructions 3.1 Equipment Installation Requirements Laser marking machine should be used in a clean environment when possible with 10 ℃ -35 ℃. The optical device should be kept dry and clean. It is highly recommended a sepa- rate and closed workshop for this machine in order to assure a constant temperature indoor.
- Page 15 FM30/fm50 Quick Start Guide The Outside of the Wiring Diagram AC220V/50Hz external input power,≥ 800W 3.2 Operation Process Instructions 3.2.1 Start Up Order ① Turn the air switch on ② Turn on the computer ③ Turn on the switch button for laser power in the front panel ④...
- Page 16 FM30/fm50 Quick Start Guide Adjust Current Frequency adjustment within range 20-80 kHz. In most situations, consider adjusting to 20 kHz. ⑥ Adjust the focal length for marking. Adjust the height of the lifting worktable. Keep the distance as the shown picture. The distance should be adjusted to 215mm (±10mm).
- Page 17 FM30/fm50 Quick Start Guide 3.2.2 Sequence of Shutting the Equipment Down ① Adjust current to the minimum (this can effectively reduce the impact on laser module) ② Turn off laser power supply switch ③ Turn off scanner power and the red light power in the front panel.
- Page 18 4. Laser beam path should be closed as far as possible in case the laser is leaked. 5. The fan must be checked if it is working correctly after being started up. 6. Use professional paper to wipe the lens clean. After wiping the lens, please wait for the alcohol to be completely volatilized before installation.
- Page 19 FM30/fm50 Quick Start Guide 4.2 Maintenance Cleaning Optical Lens Because of the working environment, the optical lens may have been polluted after being used for a period of time. If it is not maintained regularly, the dust will corrode the lens with coating. The lens that is damaged by coating cannot reflect light and let the light go through the laser.
Need help?
Do you have a question about the FM Series and is the answer not in the manual?
Questions and answers