Advertisement
NOTE: Before beginning, cover the play area to prevent possible damage.
1
Place the soap cutter in the soap mold
and align the wedges.
3
Add a few drops of yellow food coloring
and a few drops of lemon extract. Stir well.
5
6
Pour the mixture into the
Spray the mixture with
wedges and ll the rind (outer
ring) about half way.
2
QUICK START
2
CAUTION: Contents will be HOT.
Place 1/4 cup of a soap-making soap base in a
microwave-safe bowl. Then, microwave the soap for
10 seconds at a time, stirring in between, until the
soap is completely melted. Always wear heat
insulating gloves, as contents are hot!
4
Fill a spray bottle with rubbing alcohol
and spritz the soap mold and cutter to prevent
bubbles from forming.
7
Allow the mixture to cool completely.
Refrigerate if necessary.
rubbing alcohol
to remove bubbles.
8
Press the mixture out of the base
and remove the wedges
from the soap cutter.
10
Melt 2 tablespoons of soap and pour over the
wedges and rind up to the edge of the mold.
Do not mix in food coloring.
Spray with alcohol again if desired.
12
Push the entire soap out of the mold.
9
Add the rind and wedges back into the mold
without the soap cutter.
Use the design inside the mold
as a placement guide for the wedges.
11
Allow the mixture to cool completely.
Refrigerate if necessary.
13
Ask an adult to slice o the bumpy end
for clean edges on your soap.
Now, it's ready to use!
3
Advertisement
