Canon Creative Park Shaky-Shaky Maracas Assembly Instructions page 3

Assembling the head
Fit them together so that
the seams on the glue spots
(the vertical lines) are aligned.
Assembling the core
Put [A-20], [A-21] and [A-22] inside [A-19].
[A-20], [A-21] and [A-22] do not need to
be glued down, just inserted.
Completed round maraca
Put small, lightweight items
such as beads inside,
via the hole in the handle.
Shake them and make music!
"Shaky-shaky" maracas! : Assembly Instructions
Apply glue, and
fit the top half of
the head onto the
bottom.
Insert [A-20] this far.
Insert [A-21] this far.
Insert [A-22] this far.
Fold in half and glue.
*If you don't have beads or
anything else suitable, cut out
the [A-18] pieces and use them instead.
Assembling the core
[A-19] will assemble
neatly if you fold along
each of the fold lines,
then fold it in half and
glue it together.
Assembling the core
The maraca and
the core are complete.
Use the core as a "lid," to
prevent the items from falling out.
Change the things you put inside,
or their amount, and see how the
sound changes!
Glue together.
Complete!