ABB S4Cplus Manual page 2

The information in this document is subject to alteration without prior notice and should not be
regarded as an undertaking from ABB Flexible Automation AB. ABB Flexible Automation AB takes no
responsibility for errors that can occur in this document.
ABB Flexible Automation AB is not responsible for damage incurred due to the misuse of this
document, software or hardware described in this document.
The document, or parts of it, may not be reproduced or copied without prior permission from ABB
Flexible Automation AB. It may neither be imparted to a third party nor otherwise be used without
authorisation. Infringement hereof will be subject to action in accordance with applicable laws.
Further copies of this document can be obtained from ABB Flexible Automation AB at current prices.
© ABB Flexible Automation AB
Article number: 503 623-102
Date:2000-09-12
ABB Flexible Automation AB
Welding Systems
S-695 82 Laxå
Sweden.