Download Print this page

Charging; How To Epilate - Braun SILK-EPIL 5377 User Manual

Braun trimmer user manual
Hide thumbs Also See for SILK-EPIL 5377:

Advertisement

Available languages

Available languages

applying a moisture cream after epilation.
The regular use of massage sponges (e.g.
after showering) or exfoliation peelings helps
to prevent in-growing hair as the gentle
scrubbing action removes the upper skin
layer and fine hair can get through to the skin
surface.
Description
1a High Frequency Massage System
1b EfficiencyPro cap
2
Epilation head
3
«smartlight»
4
Switch with lock keys (4a)
5a Charging light
5b Low charge light
6
Release button
7
Special cord set
Only with 7681 model:
8
Underarm cap
9
Precision cap
10 Shaver head attachment with OptiTrim
comb

Charging

• Before use, charge the appliance. For best
performance, we recommend that you
always use a fully charged appliance.
Using the special cord set, connect the
appliance to an electrical outlet with the
motor switched off. Charging time is
approximately 1 hour.
• The green charging light (5a) flashes to show
that the epilator is being charged. When the
battery is fully charged, the charging light
shines permanently. Once fully charged, use
the appliance without cord.
• When the red low-charge light (5b) flashes,
reconnect the appliance to an electrical
outlet via the special cord set to recharge.
• A full charge provides up to 40 minutes of
cordless operation time.
• Wet usage might reduce the operation
time. We recommend that you recharge the
appliance after each usage.
• The best temperature range for charging,
using and storing the appliance is between
59 °F and 95 °F. In case the temperature is
far beyond this range, the charging time
might be longer whereas the cordless
operation time might be reduced.
Getting prepared for ...
... dry usage
Your skin must be dry and free from grease or
cream.
... wet usage
The appliance can be used on wet skin, even
under running water. Make sure that the skin
is very moist in order to achieve optimum
gliding conditions for the appliance. After
each wet usage, clean the appliance under
running water.
• Before use, always make sure that epilation
head (2) is clean and provided with a cap.
• To change caps, press their lateral ribs and
pull off.
• To change heads, press the release button
(6).
A How to epilate
The epilation head (2) features the new
Close-Grip Technology to help ensure extra
efficiency especially with short hairs: The
40 tweezers always keep close contact to
the skin to remove hairs as short as grain
of sand. Thanks to its pivoting feature, it
perfectly adapts to the body contours, for
maximum thoroughness.
The High-Frequency Massage System (1a)
soothes your skin effectively for an ultra
gentle epilation.
9

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Silk-epil 7 5377Silk-epil 7 7681 wdSilk-epil 7 7181 wd