Advertisement
Shelves can be assembled with flanges pointing up to retain shelf contents, or flanges pointing down to
allow the installation of drawer cabinets. Decide which option you want for each shelf before attaching it
to the sides. The beveled corner of each Shelf Side is in the back. Each shelf, the front side only has nuts
pressed into the shelf flange.
Make sure the shelf is oriented properly (pressed-in nuts in front) before attaching.
Press the shelf down firmly so that it is resting solidly against the side panel and above shelf retainers for
lowest desired shelf location.
Flat Shelf Orientation
Slide shelf firmly under and against shelf lances.
Install one 1/4" x 1/2" machine screw through the front of the side panel into the pressed-in nut on front
of shelf.
Flat Shelf Orientation
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Assembly Instructions – 40221
Pan Shelf Orientation
Pan Shelf Orientation
Page 4
Advertisement
