Page 1
Last Revised Date: 09 Mar. 2021 Copyright ⓒ 2016 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
Page 2
DQ-CUBE User Manual, Version: 1.04 Revision History 2018.11.19 (Ver. 1.00) : First Release 2019.01.30 (Ver. 1.01) : Wgd Parity, reverse command correct 2019.12.18(Ver 1.02) Remove the communication command part 2019.12.23(Ver 1.03) Change the QR Module ...
Page 3
DQ-CUBE User Manual, Version: 1.04 DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products.
DQ-CUBE User Manual, Version: 1.04 01. Introduction DQ-CUBE is a wiegand access control reader based on 13.56 Mhz contactless card communication technology with stylish and rugged design. And it also can read QR code and 1D/2D barcode.It can be installed stably both indoor and outdoor.
DQ-CUBE User Manual, Version: 1.04 04. Appearance & Installation 04.1 DQ CUBE Feature & Dimension RF Field 1/2D barcode detector ※ Caution - Do not push the bracket too hard when fixing it to the wall. - Screw has to be selected depending on the wall’s material and condition - Place the reader to flat panel between the wall mount bracket and the wall.
DQ-CUBE User Manual, Version: 1.04 BROWN BEEP YELLOW TAMPER VIOLET RS485+ ORANGE RS485- SKYBLUE 06. Operation & Usage LED Control: Reader turns on RED LED when LED Signal (BROWN) with 0V. In case of 5V, BLUE LED will be on.
DQ-CUBE User Manual, Version: 1.04 Buzzer Control: Reader makes beep sound when BEEP Signal (YELLOW) with 0V. 07. Output Format [Data format] Data format can be decided by setting. (Refer to chapter 10) First Bit (Parity) : Even parity of bit 2 ~ bit 17...
Changing the reader settings is also possible using the SDK (DualCard program) provided by DUALi. You can easily change the setting of DQ-CUBE by executing the corresponding command referring to the communication frame below. (For more information on dual cards, please refer to DUALi SDK Manual.)
10. Warranty & Service Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DQ CUBE, is free from defects in materials and workmanship for a period of 1 year from the date of purchase.
Page 14
DQ-CUBE User Manual, Version: 1.04 PRECAUTIONS Do not drop the device. Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc for cleaning. Do not expose directly to flammables. Do not place or keep the device near flammables.
Page 15
DQ-CUBE User Manual, Version: 1.04 Yeongtong-gu, Suwon-si, Gyeonggi-do, Republic of Korea, 16675 Tel : +82 31-213-0074 Fax : +82 31-213-0078 E-mail : lab@duali.com Web-site : http://www.duali.com www.duali.com...
Need help?
Do you have a question about the DQ-CUBE and is the answer not in the manual?
Questions and answers