Newgy Industries Robo-Pong 2040+ Owner's Manual page 18

Table tennis robot
Table of Contents

Advertisement

9
Fold the Ball Return
Trays closed by lift-
ing carefully until
they lock into their
verti cal position.
PLACE NET TUBES IN STORAGE HOLES
10
From the back
of the robot,
de tach the left
a n d
r i g h t
C u r v e d
Sup port Tubes from their
asso ciated Straight Net Sup-
port Tubes. Place the curved
tubes into their storage holes
(2nd & 4th holes) on top of
the Net Support Plate.
Separating The
Upper And Lower
Net Support
Tubes
Net Support
Plate
ROBOT PROPERLY FOLDED
11
When the robot is fully folded and with its
components in their proper storage posi-
tions, all parts fit within the confines of the
Center Trough and the Ball Return Trays.
FOLD TRAYS UP
N e t
12
Pull the tops
of the Ball
Return Trays
to gether by
attaching the
free end of the Tray Strap
to the top hole of the
opposite tray. Should the
anchored end of the Tray
Strap ever come loose, it
should be reattached to the
bottom hole. It may be necessary to wet it before it will fit
back in the hole.
WARNING: Do not carry the robot by its rubber Tray Strap.
This strap is not designed to support the weight of the robot.
Replace the Tray Strap with the optional Carrying Strap (see pg.
19) if you intend to carry your robot by the strap. After 2006, all
2040+ robots come with the Carrying Strap pre-installed.
13
If you pur chased
t h e o p t i o n a l
Robo-Tote car-
rying case, your
R o b o - P o n g
2040+ will now fit inside the
case. The carrying case pro-
tects the exter ior of the robot
during movement or storage
and it comes with a backstrap
for easy transport. The exteri-
or pocket is used to store the
Pong-Master targets (if you
purchased that accessory).
When in serting the targets
into the pocket, target wires
should be furthest down in the
pocket to prevent the weight
of the wires from bending the
edges of the targets.
READY FOR STORAGE OR TRANSPORT
14
With your Robo-Pong
2040+ inside its carry-
ing case, it's ready to go
any where you go. Carry
it on your back, store it
in a closet, or take it in your car to
your friend's house! Your robot will be
shielded from dust, dirt, and conden-
sation and all parts will be in one
place when you're ready to set it up
again.
18
SECURE TRAY STRAP
PLACE ROBOT IN ROBO-TOTE
Pong-Master
Targets

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Robo-pong 1040+Robo-pong 545

Table of Contents