Page 3
PRE, a new tube preamp pedal, REAL TRUE BYPASS, ready to become a must have tool for pro bass players. MARK VINTAGE PRE delivers a very wide palette of tone options, from modern sounds to vintage ones and many other features to satisfy any needs.
Page 4
ON switch (14) - turns the preamp on and off; the LED indicator is green when the effect is on. This pedal features “true bypass”circuit: that means when the MARK VINTAGE PRE is ‘off’ , there will be no audio signal quality loss.
Page 6
SEND/RETURN (18-19) - The send/return FX loop allows to interface your favorite stomp boxes and multieffect units to the MARK VINTAGE PRE, connecting the send to the effect input and the return to the effect output via standard 1/4” instrument cables.
Page 7
TECH SPECS MARK VINTAGE PRE TUBE 12AX7 (ECC 83) INPUT Impedance 1MΩ, max. voltage 6 Vpp BLOCK DIAGRAM GAIN RANGE -46 ÷ +23 dB LOW: Level ±16 dB (Freq. 70Hz) MID LOW: Level ±16 dB (Freq. 400 Hz) MID HIGH : Level ±16 dB (Freq. 2.5 KHz) HIGH: Level ±16 dB (Freq.
Page 8
Product specifications are subject to change without notice Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52 - Tel. +39 085 446 3755 - Fax +39 085 440 7764 - www.markbass.it - info@markbass.it...
Need help?
Do you have a question about the MARK VINTAGE PRE and is the answer not in the manual?
Questions and answers