Connection Of Wena 3 And The Watch Head; Initial Settings; Remarks On Pairing; Initial Setting Procedure - Seiko wiredwena N857 Instruction Manual

Table of Contents

2. Connection of wena 3 and the watch head

■

Please note the following when pairing wena 3 with the watch head

via Bluetooth communication.

Pairing is the process of performing mutual device registration when

connecting wena 3 and the watch head for the first time.

CAUTION

※ Make sure that the wena 3 app installed on your smartphone is

running.

※ Connect wena 3 to your smartphone and operate it at a close

distance from your watch head.

※ Please make sure that there is sufficient remaining battery

power in wena 3 and the watch head for pairing.

※ In the places where use of radio waves is prohibited, such as

in airplanes and hospitals, turn off wena 3 to disconnect the

communication between the watch head and wena 3.

※ Your watch is compliant with or certified by the radio law of

various countries and regions. Use of it in areas other than those

may be illegal and subject you to punishment. (Refer to P.5.)

■

When using this product for the first time, perform the following

operations and settings.

STEP 1 : Charge wena 3.

STEP 2 : Install the wena 3 app.

STEP 3 : Pair wena 3 with the smartphone.

STEP 4 : Pair wena 3 with the watch head.

For STEP 1 to 3:

Refer to the Startup Guide supplied with wena 3 and the wena

support page.

(http://wena.jp/support.html)

Table of Contents