iMotion TC601 Quick Start Manual

TC601
Quick Start Guide
General Safety Rules
 Please read this Guide carefully before you start using this device.
 Use only the TC601 components and accessories supplied by the manufacturer.
 Do not attempt to disassemble the TC601, as it does not contain parts that can be
repaired by the user. Any tampering will void the warranty.
 Discard replaced battery packs properly according to local laws.
 At the end of this device's product life, dispose of properly according to local laws.

Do not submerge the TC601 in any type of liquid.
Package Contents

TC601 Mobile Computer

Battery Pack (with Rechargeable Battery)

Quick Start Guide

USB Charge/Communication Cable

Quick Charge Compliant Power Adapter
After unpacking, please inspect package contents. If any item is
damaged or missing, please contact your customer support
representative immediately.
Features
Front View
1.
2.
3.
4.
Back View
1.
2.
3.
4.
5.
6.
Side View
Charging LED
Scan LED
Information LED
Charging Instructions
Front Camera
The TC601 battery pack is not initially fully charged. After installing the battery pack, please
charge it via the USB cable or the charging cradle. As default, the battery pack is
disconnected at the factory to avoid damage caused by excessive draining. Replace the
battery pack annually to ensure maximum performance. Avoid storing batteries for long
periods of time in fully charged or very low battery level status. To maintain a moderate
charge and maximize battery life, charge spare battery packs every two to three months.
Installing the Battery Pack
1. Push the Battery Lock Switch to Open and remove the Battery Cover
2. Align the Battery Pack and the device connectors and slide it into the Battery Slot.
3. Slide the Battery Cover into place.
4. Push the Battery Lock Switch to Closed to secure the battery.
Flash LED
Back Camera
Speaker
Battery Cover Lock Switch
Battery Pins
Battery/ Cover Latches
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES PROPERLY ACCORDINGTO LOCAL LAWS.
○ Charging via USB Cable
1
Power Button
Use the provided USB charge / communication cable together with the Quick Charge
○
2 Function Button
compliant power adapter to charge the TC601 from a power outlet.
○
3
Scan Button
Charging Time
SIM / Micro SD
○
4
Card Slot Charging time required will vary depending on the actual application of the TC601 and the
condition of the battery pack. This device is shipped with a lithium-ion battery that is not fully
○
5
Scan Button
charged. Please charge this device fully before first time use. Use under environment
temperatures of -10°C〜50°C.
○
6
Volume Up/Down
SD / SIM Card Installation
1. Turn off the TC601 or put it in Battery Swap Mode
Top View
1
Scan Window
.
Bottom View
1
Cradle IO Connecter /
. USB Connecter
2
Mic
.
○
1
Battery Cover
○
2 Battery Pack
○
3
Battery Slot
CAUTION