Disposal - Toshiba EQP Global IEC Series Installation Instructions And Maintenance Manual

Maintenance
EQP Global IEC Series Low-Voltage 50/60 Hz Metric Motor
Recommended Greases for Special
Applications
The following greases are recommended for special
applications only and should be used only for
motors specifically built for such conditions.
Minimum Ambient Temp. -60° C (-76° F)
Beacon 325
TM
Maximum Ambient Temperature 90° C (194° F)
®
Exxon Mobil Corp.
Mobil Unirex S 2
®
Conoco Phillips Co.
Triton 460
®
Exxon Mobil Corp.
Mobilith SHC 460
CAUTION
Typically, mixing different brands of grease types is
not recommended. This practice may destroy the
composition and physical properties of the grease.
In the event that a different grease is required, the
following steps can be taken.
Using the instructions for lubrication, open the
grease outlet and purge the system as much as
possible of the old or existing grease. Repeat this
operation after 1 week of service.
Consult with the TIC Customer Support Center
further recommendations on grease compatibility if
required.

Disposal

As with any electrical and/or electronic device, the
proper disposal of the item at the end of its useful
life is a serious environmental concern.
Contamination of landfills and waterways must be
avoided at all costs.
Contact your local, regional, or state agency that is
responsible for environmental protection to learn
the proper disposal methods for your area.
You may also visit https://www.iec.ch/about/values/
environment.htm or https://www.epa.gov/
information on the proper disposal of ewaste.
16
Exxon Mobil Corp.
for
for more
https://www.toshiba.com/tic/