Advertisement
Wiring:
• Use standard wire nuts to join wires
• If possible, always pre-wire prior to permanent mounting
• Verify and match the impedance of any receiver/amplifi er shown in the
wiring confi guration diagrams
• Should you have any questions regarding wiring or installation, contact
your place of purchase
Model number
Power handling (RMS/Peak)
Impedance
Frequency response (Hz)
Fs (Hz)
Force Peak (lbs./ft.)*
Dimensions Diameter x H (in)
Cut-out size (in)
* When used in four PUCK configuration
Dayton Audio
®
Specifi cations
TT25-8
20/30
8 ohm
20-80
40
30
3-1/2" dia x 1" H
70 mm dia. with 25 mm slot
5-Year Limited Warranty
See daytonaudio.com for details
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
TT25-16
16 ohm
3-1/2" dia x 1" H
70 mm dia. with 25 mm slot
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
20/30
20-80
40
30
Last Revised: 12/29/2020
Advertisement
