Advertisement
Overview: The Dayton Audio PUCK™ is a small tactile transducer intended
to be used in Home Theater, Gaming, and Auto Sound applications. Its unique
ability to transfer low frequency sound waves directly to the listener is achieved
by mounting the PUCK™ to surface areas that a listener's body will come into
contact with. Because the listener "feels" the low frequency, the volume of the
overall sound can be kept to a minimum without sacrificing the audio quality.
Flush Mounting: For installation into areas with minimal clearance the PUCK is
designed to nest into a 70 mm hole (with notch area for wiring). Use the template
below for suggested hole cutout.
Surface Mounting: Use the included surface mounting ring (SMRK-2) for easy
installation onto flat surfaces with ample clearance.
Hole Template
Notch
70 mm
70 m
m
25 mm
Area
12 mm
Optional cut-out mounting
Optional surface mounting ring
(SMRK-2)
Use six #6 wood or sheet metal
Screws to mount on surface
Advertisement
