Advertisement
3. ASSEMBLY & USE
3.1
Stand-off Assembly.
3.1.1
Assemble the stand-off as in fig.1. The M6x35mm bolts (6) should be used in the topmost holes to secure the hooks (4) and hook
brackets (3) through the brace (2) and the stand-off frame (1). Fit flat washers (9) and nuts (10) but do not tighten fully.
3.1.2
The M6x30mm bolts (7) should be used for the next row of holes to secure the hooks (4) and hook brackets (3) to the brace (2). Fit
flat washers (9) and nuts (10) and fully tighten all nuts securing the hooks (4) and hook brackets (3).
3.1.3
Attach the remaining hooks (4) to the lower part of the hook brackets (3) with M6x25mm bolts (8), flat washers (9) and nuts (10).
3.1.4
Attach the spring (5) to the brace (2) using M6x25mm bolt (8) and a flat washer (9). Secure at the other side of the brace (2) using a
flat washer (9) and a nut (10).
3.2
Attaching the stand-off to the ladder.
3.2.1
Place the stand-off assembly on the top rungs of the ladder and secure with spring (refer to fig.2).
WARNING! Due to the strength of the spring, caution must be exercised when hooking spring round ladder rung.
fig.2
4. MAINTENANCE
4.1
Periodically check that all nuts are tight and secure, but DO NOT overtighten.
4.2
Check that the rubber feet on the stand-off are in good condition and are not worn.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP327AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
LAD004
Issue: 1 - 17/10/11
Advertisement
