Advertisement
Quick Links
STAGE 1
Ensure you have all the correct items
before you begin the assembly
process.
STAGE 4
Attach one end of the black tubing to
the pumps nozzle.
H5715F2RL
Low Equinox Fountain
STAGE 2
Lean the large bowl on it's side, use
some protective material so as not to
cause damage to the bowl and feed the
pump cable through the hole in the
centre, feed all the way through until
there is approx 10cm of cable between
the pump and the bowl.
STAGE 5
Feed the other end of the tubing up
through the top bowl of the fountain.
The pump sits inside the cavity in the
bottom bowl.
STAGE 3
Stand the bowl back upright, wrap the
rubber stopper around the cable and
force down into the hole creating a
water tight seal.
STAGE 6
Sit the top bowl down pulling the
tubing through as you do so as not to
create a kink in the pipe, once satisfied
that the pipe is kink free snip off any
excess tubing.
1 of 2
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kelkay Henri H5715F2RL
Summary of Contents for Kelkay Henri H5715F2RL
- Page 1 1 of 2 H5715F2RL Low Equinox Fountain STAGE 1 STAGE 2 STAGE 3 Ensure you have all the correct items Lean the large bowl on it’s side, use Stand the bowl back upright, wrap the before you begin the assembly some protective material so as not to rubber stopper around the cable and process.
- Page 2 2 of 2 H5715F2RL Low Equinox Fountain IMPORTANT - WINTER CARE Winter Ice build-up can cause damage to concrete statuary. Follow these tips to reduce winter weathering to your fountain: • Disconnect power to pumps. • Remove adapter from bottom bowl to open drains and let all moisture out.
Need help?
Do you have a question about the Henri H5715F2RL and is the answer not in the manual?
Questions and answers