Dell E2318H User Manual page 32

Input Color
Format
Reset Color
Display
Aspect Ratio
Horizontal
Position
Vertical
Position
Sharpness
Pixel Clock
Phase
Response Time Allows you to set the Response Time to Normal or Fast.
Reset Display Select this option to restore default display settings.
32 Operating the Monitor
Allows you to set the video input mode to:
• RGB: Select this option if your monitor is connected to
a computer or DVD player using the DP adapter.
• YPbPr: Select this option if your DVD player supports
only YPbPr output.
Resets your monitor's color settings to the factory defaults.
Use the Display menu to adjust the monitor's display settings.
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.
NOTE: Wide 16:9 adjustment is not required at maximum preset
resolution 1920 x 1080.
Use or the buttons to adjust image left and right. Minimum is
'0' (-). Maximum is '100' (+).
Use the or buttons to adjust image up and down. Minimum
is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position adjustments are
only available for "VGA" input.
This feature can make the image look sharper or softer. Use
to adjust the sharpness from '0' to '100'.
The Phase and Pixel Clock adjustments allow you to adjust your
monitor according to your preference. Use
adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment,
use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
NOTE: Pixel Clock and Phase adjustment are only available for
VGA input.
or
or buttons to