Montarbo B Series User Manual page 17

BLUETOOTH
6
- Make sure the device to be synchronized with the speaker is turned on and ready to
be connected via Bluetooth
Bluetooth synchronization. The related green LED flashes.
®
- Check on the mobile device that the name of the speaker – e.g. B108 - appears among
the available devices.
- Select the speaker model to synchronize the device. The perfect connection is indicated
by the relative LED remaining lit.
- Now adjust CH3 and MAIN levels for the desired playback volume of songs chosen in
synchronized device.
CONNECTION TO THE SECOND SPEAKER
- �n the first speaker, already synchronized, keep the �TERE� button pressed for fe�
seconds. The blue LINK led starts flashing.
- Turn on the second speaker and press its PAIR button, its relevant LED starts flashing.
After synchronization, both the LINK LED of the first speaker and the PAIR LED of the
second speaker remain lit.
- Adjust second speaker LEVEL CH3 and MAIN; the signal from the source device is output
from both speakers.
QUICK SETUP
7
Place the speaker according to
the installation choice
Switch on and pair the
Bluetooth
®
CONNECTION
©
. With the speaker on, press the PAIR button to activate
®
Connect the audio sources to the Insert the mains cable and
inputs (channel levels zeroed)
Connect additional speakers
(via Bluetooth
turn on the speaker
Adjust all volumes as desired
or via cables)
®
User manual
17