Fiat Ducato Owner's Handbook Manual page 227

Then check that the nozzle holes are not clogged, if
necessary using a needle.
The washer jets should be positioned by adjusting the
angle of the sprays using a small straight-headed
screwdriver.
The jets must be directed at about
the window upper edge.
HEADLAMP WASHERS
Check the correct condition and cleanliness of nozzles
at regular intervals.
The headlamp washers come on automatically when the
windscreen washer is operated with the dipped
headlamps on.
fig. 233
BODYWORK
PROTECTION FROM ATMOSPHERIC
AGENTS
The main causes of corrosion are: atmospheric
1
/ of the height from pollution, salty air and humidity (coastal areas, or hot
3
humid climates) and seasonal environmental conditions.
The abrasive action of wind-borne atmospheric dust and
sand, as well as mud and gravel raised by other cars is
also not to be underestimated. On your vehicle, Fiat has
implemented the best manufacturing technologies to
effectively protect the bodywork against corrosion.
These include:
❒ painting products and systems which give the vehicle
❒ use of galvanised (or pretreated) steel sheets, with
❒ spraying the underbody, engine compartment,
❒ spraying of protective plastic material in the more
❒ Use of "open" boxed sections to prevent
F0N0112m
particular resistance to corrosion and abrasion;
high resistance to corrosion;
internal wheel arches and other parts with highly
protective wax products;
exposed points: underdoor, inner mudguard parts,
edges, etc...;
condensation and pockets of moisture which could
cause rust to form inside.
KNOWING
YOUR CAR
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
223