DORANI Touch Connection Manual

Wi-Fi App Connection Guide
Please See Dorani Touch Installation Manual for Wiring and Installation
The Monitor MUST be installed in a location with GOOD Wi-Fi signal
Low Wi-Fi signal can cause poor or unstable connections.
Locate the monitor as close to the Wi-Fi router/modem as possible
A Speed of 1.5Mbps UPLOAD is recommended AT THE MONITOR,
lower speeds may affect quality and reliability.
THE MONITOR WILL TAKE APPROXIMATELY 2 MNINUTES TO POWER UP
Step 2 – Connect to the local Wi-Fi / Internet ( ON THE MONITOR)
1 - Tap the Screen to reveal ALL Icons as below
Step 3 – Mobile APP connection ( ON YOUR PHONE OR TABLET)
1 : Open the APP
'scan'
Press the button.
**You can access the assistant by pressing the MENU button 4 lines top right of screen) followed by Assistant**
The System Should now be connected to the internet. A
Tick should also appear next to the PC Symbol at the
PC Wi-Fi
bottom of the screen next to the Wi-Fi Symbol.
Symbols
2 : Open Wireless settings on the monitor
PC
Press the button (see step 2 picture)
Scan the QR code on the screen with
your phone.
IOS - Save
Android – scroll to bottom of screen and
Step 1 : Download the 2-Easy APP
1) Press Wi-Fi Symbol
2) Turn Wi-Fi Switch ON
3) Select 'Wlan Setting' to search for Network
4) Choose your Network and Input Password
5) Press connect button
SAVE
3: Confirm
Device should now be registered