DG Flugzeugbau LS4 Maintenance Manual page 99

Foam:
PVC foam Divinycell H 60, 8 mm thick, mass 60 kg/m²,
<wing shells>
PVC foam Divinycell HP 80, 10 mm thick, mass 80 kg/m²,
<spar shearweb >
PVC foam Divinycell H 80 or HP 80, 6 mm thick, mass 80 kg/m²,
<stabilizer>
Foam Rohacell 71, 2.5 mm thick, mass 70 kg/m²,
<rudder>
Corrugated cardboard "E Wellpappe einseitig (370) API 80", 80g/m²
<ailerons, elevator>
alternatively for Rohacell 71
PVC-Hartschaum Divinycell H 60, 3 mm stark, mass 60 kg/m³
<rudder>
alternatively for Divinycell H60
PVC-foam Klegecell TR 75, 6 / 8mm stark, mass 75 kg/m³,
<wing shells, wing spar shear web, stabilizer>
Glue for Plexiglas
To attach the canopy:
glue
hardener
mixing ratio: 6 : 1 by mass or 4.4 : 1 by volume,
thickened with Aerosil.
To repair cracks in the canopy:
Röhm Acrifix 192 hardening by exposure to light.
Filler
For glueing, the resin-hardener mix should be thickened with chopped cotton
flocks FL l f. (add enough so that the resin no longer flows). The surfaces to
be glued should be wetted with non-thickened resin + hardener beforehand.
To glue foam pieces into place when repairing sandwich sections and to fill
in irregularities and gaps etc. around the repair, Microballoon BJO - 0930
can be used mixed with the resin + hardener. Application and mixing is
identical as for cotton flocks.
Issued: May 2011
Copyright DG Flugzeugbau GmbH - any copy or publishing prohibited
Manual valid with the up-to-date cover page only
Maintenance Manual LS4
Teroson Macroplast UK 8303B60
Teroson Macroplast UK5400
Manufacturer: Diab
Manufacturer: Diab
Manufacturer: Diab
Manufacturer Röhm
Manufacturer Clemens Wellpappe
Manufacturer: Diab
Manufacturer: Polimex
10-2