Advertisement
Advertisement
Table of Contents
Related Manuals for Adaptec AHA-1540C
Summary of Contents for Adaptec AHA-1540C
- Page 1 AHA-1540C/1542C Installation Guide...
-
Page 2: Getting Started
SW5 on the AHA-1540C must remain in the On/Closed position, even though there is no floppy controller on that host adapter. Multiple Host Adapters Select a different I/O port address for each host adapter installed. -
Page 3: Configuring The Host Adapter
3. Make sure that pin-1 orientation is maintained throughout the bus. The AHA-1540C/1542C uses a 50-pin Centronics style external connector, and a standard 50-pin header internal connector. How to Terminate Your SCSI Bus Cable... -
Page 4: Troubleshooting
Adaptec’s DOS I/O Operating Environ- ment Software, or via the BBS. See section 6. Make sure SW5 on the AHA-1540C is in the On/Closed position. It must remain in that posi- tion, even though there is no floppy controller on that host adapter. -
Page 5: Adaptec Customer Support
Reserved Reserved = Open * = Standard setting: Standard settings on your host adapter may be different; Adaptec custom con- figures for proprietary customers and resellers. = Standard on AHA-1540C A table and text explaining host adapter termi- nation can be found in sections...
Need help?
Do you have a question about the AHA-1540C and is the answer not in the manual?
Questions and answers