Cleaning, Maintenance And Storage - Smoothskin BARE Manual

5.3 CLEANING,
MAINTENANCE
AND STORAGE
1. After treatment, always switch off SMOOTHSKIN
BARE by unplugging from the electrical outlet.
2. After use, the Handset, should be inspected
for damage and wiped down with a dry, lint
free cloth.
WARNING: The glass filter can get hot during use.
DO NOT touch or clean the filter for at least
5 minutes after use to allow it to cool down.
NEVER use water or other cleaning fluids, as these
can damage the device and cause a safety hazard.
To ensure maximum performance of your
SMOOTHSKIN BARE, it is particularly important
to keep the reflector and skin tone sensor
free from dirt, hair or other debris.
If necessary, the reflector and skin tone sensor
can be carefully cleaned by using a slightly damp
cotton bud.
3. Store SMOOTHSKIN BARE in a cool, dry place.
Make sure that the treatment window and
skin tone sensor on the handset are protected from
damage.
28