Advertisement
3.Remove the screw of lower door hinge and the left side screw of the front vent (Fig
3); and then install the lower door hinge at the designated position on the opposite
side.(Fig 4)
4.Remove the screw of door handle, then remove the bottom screw of left side of the
door and remove the lower supporter of the door(Fig 5); Install the lower support of
the door to the opposite side.(Fig 6)
5.Pull open middle section of the door gasket, then it will come out the handle screw
hole(Fig 7); remove the handle and install it on the opposite side.(Fig 8)
6.Install the upper door hinge to the opposite side and tighten the screws. (Fig 9)
7.Set glass door shaft to aim the shaft of lower door hinge (Fig 10);and then aim the
upper door hinge (Fig 11); adjust the door and the cabinet is aligned and leveled,
then tighten all the lock screws.
You also can call customer service for reversal instructions if it is necessary.
5. Care and Maintenance
Cleaning Your Wine Cooler
⚫
Wash the inside surfaces with warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda with a quart of water.
⚫
Wash the shelves with a mild detergent solution.
⚫
Turn off the power, unplug the appliance, and remove all items including shelves
and rack.
⚫
Wring excess water out of the sponge or cloth when cleaning area of the
controls, or any electrical parts.
⚫
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well
and wipe dry with a clean soft cloth.
26
Hide quick links:
Advertisement
