Advertisement

Quick Links

FAQ
Which camera do the Removu S1 Supports?
The Removu S1 natively supports GoPro Hero 3/3+, Hero 4, Hero 5, Hero 6, Hero 2018, and Hero 7. In addition, it
also supports YI 4K/4K+ and Garmin Virb Ultra (mount housing are sold separately).

Can I charge the S1 while operating it?

The S1 cannot be charged while in use.

What is the USB port on the S1 used for?

The USB port is only used for firmware updates, not for charging unfortunately.

What are the 3 modes on the gimbal and what do they do?

Pan Mode – Tilt and roll are locked; camera can pan left and right
Follow Mode – Camera can pan left, right, up, down
Lock Mode – Pan/tilt/roll axis are all locked

When do I use the Balance Weight Cap?

You should install the balance weight cap when using a GoPro BacPac or a GoPro HERO 5 Black, HERO 6, HERO
(2018), HERO 7 camera. When the balance weight cap is installed, the gimbal should be in BacPac mode. Press and
hold the 'M' button for 3 second to enable/disable BacPac mode.

Do I need to calibrate regularly?

Calibration is not regularly needed. However, if the gimbal seems unbalanced while in use, proceed to calibrate the
gimbal.
Why does my camera slowly drift to the left in "Lock" Mode?
At this point, every gimbal out in the market using gyro-sensor and 3-axis motors are having the same occurrences.
To balance out the gimbal, please restart the S1, or switch to other modes and go back to Lock Mode again. In
addition, performing user calibrations for several times may also help.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REMOVU S1

  • Page 1 Which camera do the Removu S1 Supports? The Removu S1 natively supports GoPro Hero 3/3+, Hero 4, Hero 5, Hero 6, Hero 2018, and Hero 7. In addition, it also supports YI 4K/4K+ and Garmin Virb Ultra (mount housing are sold separately).
  • Page 2 Is there a S1 mount for Sony action cameras and mobile phones? We have tried to develop S1 mounts for Sony and iPhone. However, we were not able to do so, due to the size of the S1 motors being optimized for GoPro cameras. We are not able to release the mounts for other cameras without a result that footage is stable from vibration or impact while using S1 with the other cameras.
  • Page 3 How do I connect the remote control to the S1? Turn on both the remote control and the S1. Press and hold the joystick down for around 5 seconds with the S1 remote control. Press and hold the pair button (the button with a chain symbol) for around 5 seconds with the S1.
  • Page 4 Can S1 be used with other REMOVU products such as M1+A1 or R1+? Yes, you can use GoPro with all our REMOVU products combined. If using M1+A1 with S1, please use the weight balance cap.

Table of Contents