Initial Operation; Cleaning Instructions - Ecotherm SOLAMAGIC 500 W Installation And Instruction Manual

Initial operation

The heater must be connected to the mains. For those models without a switch,
heating starts as soon as the plug is plugged into the socket. For models with a
switch or a wireless switch, heating starts when the switch is turned on or via the
remote control.
If necessary see also the separate operating instructions for the remote control.

Cleaning instructions

• Disconnect the heater from the mains.
• Allow the casing to cool.
• Wipe the casing clean with a moist, soft cloth. Do not use any detergent.
Never immerse the heater in liquids nor spray-wash it.
Possible discoloration of the protective grille due to heat effects results from
normal physical processes and is not a defect.
06/2018
94