Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MWf Aqua
Summary of Contents for MWf Aqua
- Page 1 Metal and Water Finder Manual User’s USER’S MANUAL FOR...
-
Page 2: Table Of Contents
Contents Metal and Water Finder Contents Page Safety information Page Technical specification Page Device parts Page Interfaces and components of Device Page Overview Page Assembly Page Setup wizard Page Start searching Page Notes Page Page... -
Page 3: Safety Information
Safety information The operating in high voltage areas The cell signal interferes with the would limit the results and device signal, so turn off the cell performance while operating Don't store in high temperature or Don't operate two devices with high humidity same method of search at the same place... -
Page 4: Technical Specification
Technical specification Search system : long distance sensing system (LDS) Digital Frequency Signal Processing (DFSP) / To Receiving Search principle: Electrostatic Fields of the targets Operating processor: MICROCONTLLER PIC18 Operating frequency: From 1 kHz to 9 kHz Power: 4 AAA batteries 1.5 volts / Equivalent of -6volt interchangeable Power consumption: Maximum of consumption 25 mAh Battery life:... - Page 5 Technical specification Automatic smart Yes, through the Smart LDEs interface to locate the target path. guidance system: Voice alerts: Vibrating alert: Operating temperature: From -15° C to 60° C Storage temperature: From -15° C to 40° C It can be stored and work in the degree rate of air humidity Humidity: of level 90%.
-
Page 6: Device Parts
Device parts Main Control Unit 100m 150m The unit which is responsible for adjusting the device and 200m setting inaddition to full exploration search through this it. Handel Grip Coms with the device . Used to carry the device through for the searching process, it has capability to rotation 360 degree. - Page 7 Interfaces and components of Device Front-end 100m 150m 200m Signal port ,connected with antennas Sound and vibration controlling button User interface. Scan button LED Indicators for signal. Depth levels interface . Target type interface . Battery level indicators. Distance levels interface . Selection keys (depth, distance &...
-
Page 8: Interfaces And Components Of Device
Interfaces and components of Device Backend Handle socket. Battery compartment. Audio out. Page... -
Page 9: Overview
200 meters forward at 360 degree angle with precise control in distance search front end. Aqua device search depth up to 200m below the surface of the earth with strict control on deep research of device control interface the device of features a small size and ease of use. - Page 10 Overview This electronic device works on water finder technology transmitter and receiver. It sends waves and receives at the same time, the device turn research and detection of groundwater by revealing waters partial frequency, and energy electro-static (static electricity) around in the water , make up groundwater stored and surrounding soil and are gaining in the underground streams and areas of static electricity gained from the soil through the soil influenced by different currents such as power stations, broadcasting stations, radio, satellite, lightning,...
-
Page 11: Assembly
Assembly 100m 150m 200m SPARK Connect the antennas in their places in front of the front part of the device as shown in the drawing. Connect the carrier handle in its place at the bottom of the machine as shown in the drawing. -
Page 12: Setup Wizard
Setup wizard Characteristics and functionality To turn on the device press and hold the power key (for seconds) and for shut down process we do the same way. To control the audio levels through the key sound and pressure intermit- tently on the key to change the level. - Page 13 Setup wizard Search settings Turn on device through turn and close key. Choose the desired water type by pressing the target key and you will notice the change in optical indicators that special for target part at the top of device each target there is a special light and goals (Natural water ,salty water , mineral water and all types of water ).
-
Page 14: Start Searching
Start searching The user must carry the device through the carrier handle so the device is horizontal with the ground and tilted slightly toward the soil as shown in the drawing. Soil And then just do the stimulation for waves and area outside of the device and we move the device by hand turn right and then left slowly and then install the hand that the device. - Page 15 Start searching If you find the water that was determined search for it. The device will receive this read and signal and thus change the device path automatically from normal path that was stable in it to another path and this trend is toward water location.
- Page 16 Start searching The user can know and estimate water distance from starting point search and to do that we change the distance level by pressing on distance key then we select distance from a list of distance for example if we have chosen at the beginning of search 200 search distance meters we reduce the distance of 50 meters then press on key scan again and the device starts to search and make previous steps.
- Page 17 Start searching Note: When you begin the process of tracking for water location you will notice the device produce alerts and a acoustic signals toward water location but if you notice that you are go out from derailing and direction of water this sound will disappear and another sound is heard indicating the error mode.
-
Page 18: Notes
Notes Page... - Page 19 United States of America - illinois www.mwf-usa.com info@mwf-usa.com +1 ( 708 ) 364 9602 Turkey - istanbul www.mwf-metaldetectors.com info@mwf-metaldetectors.com +90 ( 212 ) 222 0946 +90 ( 212 ) 222 0947 Metal and Water Finder...
Need help?
Do you have a question about the Aqua and is the answer not in the manual?
Questions and answers